- Values from 1 pF to 10,000 µF in any custom value available
- Stability as good as ±0.01 %/year
- Two-to-five terminal configuration, depending on model
- Excellent TC: as low as 10 ppm/°C
- 3 year warranty included
- Accredited calibration included
- Mechanically stabilized capacitors
- Calibrations available at standard or any custom frequency
- Available in BNC and Binding Posts depending on value
Prices range from 1 270,00 US$ para 7 275,00 US$
The SCA Standard Capacitor series are highly stable cost-effective capacitance standards with low temperature coefficient, low losses and a wide range of values of 1 pF - 10,000 µF.The cost and flexibility make this our most popular capacitance standard.
- Inexpensive solution for calibration of LCR meters
- Ideal for calibration of precision LCR meters where MU of better than 0.02% is required
- 1 pF to 10 pF, are made from precision air capacitors
- 100 pF to 1 µF, are constructed of silvered mica capacitors of very high stability
- above 1 µF, are made with hermetically sealed metallized polypropylene sulfide
- Typical capacitors, observed over decades, have shown random fluctuations of less than + 0.01% in measured capacitance with no evidence of systemic drift.
- The capacitors are available with a variety of connectors such as bnc, and binding posts.
- Connection via 4-terminal bnc pair, similar to the Keysight 16380C Capacitance Standard Set, is also available for direct connection to many LCR meters
IET Labs has designed the SCA-1nF-8588A to calibrate the Fluke 8588A 1 nF capacitance range as discussed in the Verifying the capacitance function of the 8588A Reference Multimeter Applications Page.
The 1 nF range in the Fluke 8588A is the only range that does not use a resistance range and can be checked/calibrated with the SCA-1nF-8588A. The other capacitance ranges can be monitored by observing the change in the appropriate resistance range.
Especificações básicas para capacitores padrão SCA
(Especificações completas podem ser encontradas na folha de dados)
Calibração: Um certificado de calibração acreditado pela A2LA para ISO-17025 é fornecido com cada unidade
- Valor nominalModeloAjuste para nominalCoeficiente de temperatura (ppm / ° C)Frequência de calibração *Dissipação (típica)Estabilidade (por ano)TerminaisTipo de capacitor1 pFSCA-1pF± 0,1%+20 a +401 kHz0,002± 0,1 pF2 bnc + gndCapacitores de ar1,9 pFSCA-1.9pF± 0,1%+20 a +401 kHz0,002± 0,1 pF2 bnc + gndCapacitores de ar10 pFSCA-10pF± 0,1%+20 a +401 kHz0,002± 0,1 pF2 bnc + gndCapacitores de ar19 pFSCA-19pF± 0,1%+20 a +401 kHz0,002± 0,1 pF2 bnc + gndMica prateada100 pFSCA-100pF± 0,1 pF201 kHz0,0005± 100 ppm2 bnc + gndMica prateada190 pFSCA-190pF± 0,1 pF201 kHz0,0005± 100 ppm2 bnc + gndMica prateada1 nFSCA-1nF± 0,02%201 kHz0,0003± 100 ppm2 bnc + gndMica prateada1,9 nFSCA-1.9nF± 0,02%201 kHz0,0003± 100 ppm2 bnc + gndMica prateada10 nFSCA-10nF± 0,02%201 kHz0,0003± 100 ppm2 pb + gndMica prateada19 nFSCA-19nF± 0,02%201 kHz0,0003± 100 ppm2 pb + gndMica prateada100 nFSCA-100nF± 0,02%201 kHz0,0003± 100 ppm2 pb + gndMica prateada190 nFSCA-190nF± 0,02%201 kHz0,0003± 100 ppm2 pb + gndMica prateada1 μFSCA-1μF± 0,02%201 kHz0,0002± 100 ppm2 pb + gndMica prateada1,9 μFSCA-1.9μF± 0,02%201 kHz0,0002± 100 ppm4 pb + gndMica prateada5 μFSCA-5μF± 0,02%± 501 kHz0,0005± 200 ppm4 pb + gndMPPS10 μFSCA-10μF± 0,04%± 50100 Hz0,0005± 200 ppm4 pb + gndMPPS19 μFSCA-19μF± 0,04%± 50100 Hz0,0005± 200 ppm4 pb + gndMPPS100 μFSCA-100μF± 0,05%± 50100 Hz0,001± 500 ppm4 pb + gndMPPS190 μFSCA-190μF± 0,05%± 50100 Hz0,001± 500 ppm4 pb + gndMPPS1.000 μFSCA-1000μF± 0,4%-150100 Hz0,001± 500 ppm4 pb + gndMPPS5,000 μFSCA-5000μF± 2%-150100 Hz0,001-4 pb + gndPolipropileno10.000 μFSCA-10000μF± 2%-150100 Hz0,001-4 pb + gndPolipropileno
